Comments for METBEL-Metal Bellows Mechanical Seal» Mechanical Seals, Metal Bellows Mechanical Seals http://www.METBEL.com Tue, 03 Aug 2010 06:30:38 +0000 hourly 1 http://wordpress.org/?v=3.0.1 Comment on Metal Bellows Seals by petermetbel http://www.METBEL.com/comment-page-1/#comment-1190 petermetbel Tue, 03 Aug 2010 06:30:38 +0000 http://dailyplace.com/METBEL/?page_id=3#comment-1190 Dear Vassili, Sorry, we can't supply the mechanical seal you mentioned. Best regards, Peter Dear Vassili,

Sorry, we can’t supply the mechanical seal you mentioned.

Best regards,
Peter

]]> Comment on Metal Bellows Seals by Vassili http://www.METBEL.com/comment-page-1/#comment-1178 Vassili Mon, 02 Aug 2010 16:09:18 +0000 http://dailyplace.com/METBEL/?page_id=3#comment-1178 Dear Sir, Can make mechanical seal with the same dimensions as I sent you early. OD:2.127 (54.02 mm) and ID: 1.373 “ (34.87 mm) , 0.404” (10.26 mm) wide.. As you can see on picture it is made of aluminum cylinder , 3 plastic seals with spring all around on the top and lock ring. I lost 2 other plastic seals (brown) that is why It is not on picture. Shaft speed 22000 rpm and temperature up to 300 F.(148.888 C). Vassili.G Dear Sir,

Can make mechanical seal with the same dimensions as I sent you early. OD:2.127 (54.02 mm) and ID: 1.373 “ (34.87 mm) , 0.404” (10.26 mm) wide.. As you can see on picture it is made of aluminum cylinder , 3 plastic seals with spring all around on the top and lock ring. I lost 2 other plastic seals (brown) that is why It is not on picture. Shaft speed 22000 rpm and temperature up to 300 F.(148.888 C).

Vassili.G

]]> Comment on High Temperature Application by petermetbel http://www.METBEL.com/product/high-temperature-mechanical-seal/comment-page-1/#comment-442 petermetbel Mon, 21 Jun 2010 10:45:12 +0000 http://www.METBEL.com/?page_id=12#comment-442 Dear Srinivasan, Yes, we have. Please let us have more info about application temperature, so we can suggest appropriate model. Best regards, Peter Dear Srinivasan,

Yes, we have.
Please let us have more info about application temperature, so we can suggest appropriate model.

Best regards,
Peter

]]> Comment on High Temperature Application by srinivasan http://www.METBEL.com/product/high-temperature-mechanical-seal/comment-page-1/#comment-440 srinivasan Mon, 21 Jun 2010 08:35:19 +0000 http://www.METBEL.com/?page_id=12#comment-440 do you have a high temperature static seal? do you have a high temperature static seal?

]]> Comment on Contact Us by petermetbel http://www.METBEL.com/contact-us/comment-page-1/#comment-96 petermetbel Thu, 06 May 2010 12:13:08 +0000 http://dailyplace.com/METBEL/?page_id=4#comment-96 Dear Wei, We are METBEL metal bellows mechanical seals. We don't supply pump. Regards, Peter Dear Wei,
We are METBEL metal bellows mechanical seals.
We don’t supply pump.

Regards,
Peter

]]> Comment on High Temperature Application by petermetbel http://www.METBEL.com/product/high-temperature-mechanical-seal/comment-page-1/#comment-95 petermetbel Thu, 06 May 2010 12:06:06 +0000 http://www.METBEL.com/?page_id=12#comment-95 Dear Jim, Sorry we don't have 0.5" seal size. Regards, Peter Dear Jim,

Sorry we don’t have 0.5″ seal size.

Regards,
Peter

]]> Comment on High Temperature Application by petermetbel http://www.METBEL.com/product/high-temperature-mechanical-seal/comment-page-1/#comment-94 petermetbel Thu, 06 May 2010 12:03:36 +0000 http://www.METBEL.com/?page_id=12#comment-94 Dear Dheeeraj, May I have drawing of your existing seals? So we can evaluate and advise. Best regards, Peter Dear Dheeeraj,

May I have drawing of your existing seals?
So we can evaluate and advise.

Best regards,
Peter

]]> Comment on High Temperature Application by DHEERAJ GULATI http://www.METBEL.com/product/high-temperature-mechanical-seal/comment-page-1/#comment-86 DHEERAJ GULATI Mon, 03 May 2010 10:43:39 +0000 http://www.METBEL.com/?page_id=12#comment-86 DEAR SIR, I HAVE THE REQUIREMENT OF METAL BELLOW SEAL FOR MY PUMP MODEL NO. KSB CPKEY 50-200 OUR IN DISTILLATION PLANT PUMP IS IN THE REQUIREMENT FOR CIRCULATION OF OUR BLACK OIL OR WASTE OIL THE PUMP USE FOR CIRCULATING THE OIL FROM VESSEL TO HEAT EXCHANGER IN THIS OUR VESSEL AND HEAT EXCHANGER IS .3 TORR VACUUM THAT MEANS VERY HIGH VACUUM . CURRENTLY I AM STILL USING THE METAL BELLOW SEAL OUR VESSEL TEMPERATURE GOES TO 350 DEGREE IN WHICH VACUUM DOES NOT LEAK FROM THE PUMP. KINDLY TELL QUOTE ME THE RATE OF YOUR SEAL F.O.R INDIA. AND ALSO TELL ME WHICH SEAL IS REQUIRED FOR THIS APPLICATION WAITING FOR YOUR PLY, THANKING YOU,' REGARDS DHEEERAJ GULATI VENUS OIL CORPORATION E-53 SITE-3 PANKI INDUSTRIAL AREA KANPUR (U.P) 208023 INDIA +919838822648 DEAR SIR,
I HAVE THE REQUIREMENT OF METAL BELLOW SEAL FOR MY PUMP MODEL NO. KSB CPKEY 50-200 OUR IN DISTILLATION PLANT PUMP IS IN THE REQUIREMENT FOR CIRCULATION OF OUR BLACK OIL OR WASTE OIL THE PUMP USE FOR CIRCULATING THE OIL FROM VESSEL TO HEAT EXCHANGER IN THIS OUR VESSEL AND HEAT EXCHANGER IS .3 TORR VACUUM THAT MEANS VERY HIGH VACUUM . CURRENTLY I AM STILL USING THE METAL BELLOW SEAL OUR VESSEL TEMPERATURE GOES TO 350 DEGREE IN WHICH VACUUM DOES NOT LEAK FROM THE PUMP. KINDLY TELL QUOTE ME THE RATE OF YOUR SEAL F.O.R INDIA. AND ALSO TELL ME WHICH SEAL IS REQUIRED FOR THIS APPLICATION
WAITING FOR YOUR PLY,
THANKING YOU,’
REGARDS
DHEEERAJ GULATI
VENUS OIL CORPORATION
E-53 SITE-3 PANKI INDUSTRIAL AREA
KANPUR (U.P) 208023
INDIA
+919838822648

]]> Comment on High Temperature Application by Jim Fargo http://www.METBEL.com/product/high-temperature-mechanical-seal/comment-page-1/#comment-79 Jim Fargo Mon, 26 Apr 2010 19:01:55 +0000 http://www.METBEL.com/?page_id=12#comment-79 I want to seal between a shaft and housing. I internal pressure is 2psig and will hold N2 and potentially corrosive gases. The shaft will be raised and lowered at times with a 1/2" or 2" stroke. The shaft outside diameter is currently 0.5" and the housing od is 1". This could be altered to match stock bellows seals. Thanks, Jim Farago 978-667-4111 x354 I want to seal between a shaft and housing. I internal pressure is 2psig and will hold N2 and potentially corrosive gases. The shaft will be raised and lowered at times with a 1/2″ or 2″ stroke. The shaft outside diameter is currently 0.5″ and the housing od is 1″. This could be altered to match stock bellows seals.

Thanks,

Jim Farago
978-667-4111 x354

]]> Comment on Contact Us by Wei Yang http://www.METBEL.com/contact-us/comment-page-1/#comment-73 Wei Yang Thu, 22 Apr 2010 08:36:05 +0000 http://dailyplace.com/METBEL/?page_id=4#comment-73 Dear Sir, I am a Ph.D student in a laboratory in Beijing, China. A recirculating pump is needed to circulate the gas in our vacuum equipment, in which the working pressure is about 50mbar. My colleague in a french laboratory suggest me to use a product of your company which is called "Metal Bellows Mb-41E recirculating pump". If it is possible, please send me some detail information of this pump to my email(frankyangpu@163.com), and please tell me the price and how to buy and pay it. Dear Sir, I am a Ph.D student in a laboratory in Beijing, China. A recirculating pump is needed to circulate the gas in our vacuum equipment, in which the working pressure is about 50mbar. My colleague in a french laboratory suggest me to use a product of your company which is called “Metal Bellows Mb-41E recirculating pump”. If it is possible, please send me some detail information of this pump to my email(frankyangpu@163.com), and please tell me the price and how to buy and pay it.

]]>